Discover the No-brainer Steps in Finishing Unfinished Furniture
Did you know that you can save as much as 50 percent if you buy unfinished furniture instead of the ready to use ones? There are lots of stores both online and offline that specialize on unpolished furniture with no finishing.
You will certainly get good value for your money if you buy a kind of furniture with no finishing. However, you must finish such kind furniture to make it usable. But this is a no-brainer actually.
Finishing unfinished bedroom furniture for example can be a very good project where you can express your artistic skills. You never know, this could be the perfect hobby that you have always wanted to do for sometime now.
So here are some simple no-brainer steps in finishing unfinished furniture. This project may take at least two days so you better schedule it over the weekends.
1. The first thing you have to do is to find a suitable place where you can work to finish the furniture. Your work area should be roomy and with enough ventilation.
2. Prepare your tools and the necessary finishing and coating chemicals. Basically, you will need screw drivers, sanding materials, wood stain, polyurethane varnish, two sets of paint brushes, lots of cloth, and old newspapers.
3. Before you start working, line the floor with old newspapers to protect it from the varnish and coating. Never smoke while you are working because polyurethane is a highly flammable material.
4. If the unfinished furniture is fully assembled, you should unscrew all hardware. This way, you can finish all the nooks and crannies of the furniture.
5. Sand the surfaces and the insides of the furniture thoroughly. If you have a power sander, then your work will be easier. Otherwise, you have to do it manually and make sure that even the smallest crevices can be sanded.
6. Take a damp cloth and wipe the furniture to remove all saw dusts. Do not use a dripping cloth because your work area will become too messy. Just make sure that the saw dust will easily adhere to the damp cloth.
7. After drying, you can now apply the finishing. Apply the wood stain first then varnish the furniture. It is up to you whether you will apply 2 or 3 coatings.
Voila! You are done. Your furniture now is fully finished. You can also apply paint to your unfinished furniture if you want. Jazzing up the furniture depends on your artistic taste.
Tags: fully assembled, unfinished furniture, unpolished furnitureBasic Guide for Buying Unfinished Wood Furniture
Buying unfinished wood furniture can be a big money saver. However, you may also encounter several problems if you are not careful. There are pitfalls in buying ready to finish furniture especially if you will not inspect the item thoroughly.
Here’s a basic guide that could help you in finding quality made pre-finished furniture. By following the tips here, you will be able to enjoy finishing the unfinished furniture and your work will be easier.
1. When buying unfinished wood furniture, the first indicator of quality is the price.
In this industry, you will really get what you pay for. If you buy super cheap unfinished woodwork, you have to expect that the item would be very rough and have lots of imperfections.
It does not mean however that you go for the most expensive piece of bare woodwork. What you need to is to strike a balance between price and quality. Take a closer look and try to assess if finishing the furniture requires lots of hard work. You would not want that of course. So, use your better judgment and determine of you can get good value from the unfinished furniture.
2. There are numerous varieties of unfinished home furniture.
Some are made from hardwood or deciduous trees like oak and maple. There are also softwood varieties that come from pine or fir. Whatever your choice is, make sure that the furniture has been pre-finished or sanded. It is also best if you can avoid rough and knotty wood. A very rough woodwork needs extra work and you may not have the time for that.
3. You must check the general quality of assembly.
Some craftsmen use power staples to join pieces together. Make sure that the joints are not wobbly and feeble. It is also best if you can find furniture that has been glued tight with wood glue and wood cement.
4. The most important parts that you need to check are the drawers.
This is particularly true if you are buying unfinished pine furniture such as cabinets or bedroom side tables. The drawers should fit perfectly and there should be a guide for hassle free sliding. It is impossible to fix a drawer that is too big or too small for the opening.
Buying unfinished wood furniture is a practical move. Just make sure that the item does not have full of defects or constructed very poorly. You might spend more in finishing the furniture if you will not closely inspect the overall quality of the item that you are going to buy.
Tags: bare woodwork, finishing the unfinished furniture, quality of assembly, unfinished home furniture, unfinished wood furnitureTop Reasons Why Choosing Unfinished Pine Furniture Is Best
There are many advantages that you can enjoy if you buy unfinished pine furniture. For one, pine is a very versatile wood variety. There are many things that you can do with it so you will have more leeway to pep up the pre-finished furniture.
There are also lots of stores that offer ‘in the rough’ pine furniture. Whether you shop from online stores or from your local woodwork stores, unfinished pine wood furniture will definitely be included in their inventory.
So, if you really want to buy unfinished furniture, it would be best if you will look for pine furniture first before you look for other wood varieties. Here’s why:
1. One compelling reason why you should buy furniture made from pine is the price.
This wood variety is cheap, so the unfinished pine furniture would be cheaper also compared to others. The price factor is very important if you are buying unfinished wood furniture. That is because you still have to buy materials to finish it.
2. Pine furniture is also neutral in terms of wood color and hue.
This is another good reason why pine furniture is a good option. It would not be too difficult to choose the right color coating that would match with pine wood. Practically all types of color coating can be used for pine furniture. Your work therefore would be easier.
3. Pine is also very sturdy because it is a very dense wood.
It would be strong enough to support heavy objects and will be very durable. Your pine furniture will surely last for a lifetime because of the wood quality.
4. Unfinished pine furniture has less sap and will be finer than other softwood.
You will not experience much difficulty in sanding or finishing pine wood. It can also quickly absorb coating and paint so the drying process would be faster.
5. Once finished, any pine furniture will blend well with other furniture in your house.
It will not be too obtrusive. However, the elegant finish of pine furniture will make a room look lively and lovely.
6. Pine wood is not too heavy but not light also.
It is a perfectly balanced wood in terms of weight. You can move it easily if you want to rearrange the layout of a room. But it is heavy enough which makes the furniture stable.
So the next time you buy pre-finished woodwork, you will surely enjoy numerous advantages if you choose unfinished pine furniture. It is cheaper and versatile also so you will have a great time finishing the pine wood.
Tags: dense wood, pine furniture, pine wood, pre-finished woodwork, unfinished pine furniture, versatile wood variety